Features

• Rotation Speed and direction : 20 – 300 RPM
• Bath Temperature range and set temperature resolution : Ambient temperature to 180°C and accuracy ±1°C
• Bath volume : 4 Ltrs.
• Display and control system : TFT color graphic control panel
• Lift function/ movement (up down) : Motorized Lift.

Receiving Flask:

• Supplied with 1 Liter x 2 pcs,500 ml x 1 pcs receiving flask. Provided with standard connector & seal.
• Supplied flasks will be compatible with the supplied device.

Evaporating Flask:

• Supplied with evaporating flask of 250mL x 2 pcs,100 mL x2 pcs, 50 mL x 2 pcs.
• Supplied with compatible adaptor and connector for mentioned volume flasks.

Material Of Construction

• Bath material : Material in contact with medium will be made of SS 316L
• Power Failure : Evaporating flask will be automatically lifted out of heating bath in case of power failure.
• Condenser : Vertical, coated, cooling surface not less than 1500 cm².
• Power supply and Frequency : 220-230V, 50-60Hz.
• Power consumption for water bath : Maximum 1500W.
• Timer function : Present. Interval mode and right-left operation in interval mode
• Over temperature protection : Boil dry protection and temperature safety circuit.
• Automatic boiling point detection and end point detection : Present
• Integrated solvent library : Integrated solvent library with inbuilt parameters for at least 30 solvents. The solvent library will be expandable
• Automation : Ventilation, cooling water and heating bath management will be automatic.
• Communication interface : RS232 and USB interfaces
• Vacuum controller : Integrated in the rotary evaporator.
• Accessories : The followings accessories compatible with the supplied equipment will be provided: Distillation spider suitable for 5 flasks of 50 mL (1 unit), fixation clip (1 unit), lab grease (100 g), Ball joint clamp (4 pcs), Clamp for evaporating flask (4 units), Condenser holder/stand (1 unit), protective covering for heating bath and other necessary accessories for installation and operation.

Chiller

• Chiller type : Recirculating Chiller
• Working temperature range : -10°C to room temperature
• Set Temperature resolution : ±0.1°C
• Cooling Capacity : Not less than 400W at liquid temperature of 20˚C. Not less than 350W at liquid temperature of 10˚C. Not less than 250 W at liquid temperature of 0˚C. Not less than 140 W at liquid temperature of -10 ˚C.
• Pump delivery rate : 12 – 15 liter/min.
• Temperature Display : Digital display.
• Tank capacity : 13 liter capacity with easily observable filling level.
• Refrigerant : CFC Free, suitable for the operating temperature range.
• Temperature control and working temperature sensor : PT-1000
• Communication interface : RS232 and USB interfaces
• Power consumption : Not more than 300W.
• Power supply and frequency : 220-230V AC, 50-60 Hz.
• Accessories and spare parts : All the accessories necessary for installation and operation of the supplied rotary vacuum evaporator set will be provided.

Vacuum Pump

• Type : Digital four-chamber membrane vacuum pump with chemical resistant membrane.
• Maximum pump rate : Not less than 1.3 m3/h.
• Final vacuum : Not more than 3 mbar.
• Noise level : <64dB. (at 1.5 mtrs distance in open field condition)
• Display : LED display for current RPM.
• Speed range (RPM) : 1350 RPM
• Interface : USB and RS 232 interfaces
• Power consumption : 150 W.
• Power supply and frequency : 100-240V, 50-60Hz.
• Accessories : The followings accessories compatible with the supplied equipment will be provided: Communication cable for connecting pump with the controller (1 unit), silicone vacuum hose (2 meter) compatible with supplied vacuum pump and rotary evaporator, and other accessories necessary for the operation of the supplied equipment.
• Certification : CE, ISO 45001:2018, ISO 13485:2016, ISO 9001:2015, ISO 14001:2015, IEC 60601-1, IEC 61010-1, BS EN 12469:2000, U.S. FDA, RoHS & GMP CERTIFIED

Technical Specifications & Ordering Informations